An Overview on Binding Wires and Different Ways of Tying Binding Wires with Rebars

 

Binding Wire is most probably utilized for attaching applications in the field of construction. They are mainly used in the building construction areas for binding the rebars at the joints to hold the structure intact. They are made of gentle steel.

 

Diameter and Specifications:-

These wires are coated with a diameter of 0.16 mm - 2 mm.  Diameters of 0.8 mm, 1 mm, and 1.2 mm of wires are generally used.

 

Benefits:-

The Binding Wires are developed in such a way that they are flexible enough to fulfill the multiple usages needed often. The tensile strength of them helps in tying the knots without any breakage. Annealing enables the wires to stay affluent for the ease of any application. They whip the concrete into the frames without dislocating the rebars. To safeguard secondary frame models like chairs, spacer bars in construction, Holding lapped bars in an ideal position.

 

Types of Binding Wires:-

 Here are the following types of binding wires.

●      Constructional Binding Wire, made by straightened cut wire

●      Black Annealed Binding Wire, for daily tying

●      Galvanized Iron Binding Wire

●      Small Coil Rebar Wire

●      Tie Loop Tie Wire,

●      Binding Wire for Packing

●      U Type Binding Wire

●      Book Binding Wire( Stitching Wire)

●      Galvanized Wire

●      Stainless Steel Wire

●      Brass Wire Aluminum Wire

●      PVC coated binding wire

 

Different ways of Tying Binding Wires with Rebars:-

There are several types of ties utilized while strengthening the bars.

●      Simple Tie - Light floor mats

This tie is generally used in flat-level works for protecting the reinforcing bars to stand against displacement due to work done by other trades and by concrete placing. This is a basic tie that is used for tying bars in caissons, now and again utilizing them. Single binding wires are stronger by and around the primary bar where they are twirled.

●      Wall Tie -Vertical mats

Steel Wire is generally used in the building and development industry because of its great corrosion resistance and strength. Wall ties are formulated from SS wires for regulating brickwork, blockwork, and stonework. As the name suggests that this tie is utilized for attaching the even bars in long shear dividers and compound dividers where the basic tie isn't fit for wielding the level ones.

 

 

 

●      Double-Strand Single Tie - Heavy works

These ties are straightforward however as opposed to using a single wire, double binding wire and tie are utilized similarly.

 

 

 

●      Saddle or U Tie

This type of tie is more complicated as per the additional ties however is outstanding in areas like tying establishment fortifications/shear dividers. The profitability is diminished as this tie is extra tedious.

 

 

●      Tie with Twist - Heavy mats to be raised by crane

These ties are like U yet one and a half turns are wrapped which provides extra solidness to the reinforcements utilized fundamentally for significant rafts or in the case where precast reinforcements are finished.

 

●      Cross Tie - For no twisting bars

This tie offers the absolute defense from twisting the bars and allowing immense burden on the reinforcements. Using such ties, uneven ties can be given.

 

 

 

In the current situation, this type of tying binding wires is generally utilized in the development of businesses. Tying of rebars is performed to safeguard their given position with a firm clasp until the completion of that specific RCC structural work. So, choosing the perfect type of tie is your choice as tying itself does not carry any structural load.

 

You can get different types of binding wires for Cabcon India, one of the top binding wire manufacturers in India. They have been committed to top-notch, resourceful, smart, and on-time services since its inception, combining bespoke and cutting edge technology, method, and product. To discover more about their products, visit their site https://www.cabconindia.com/