ACSR stands for
Aluminium Conductor Steel Reinforced, it is a stranded conductor that is more
durable. It's typically used for transmission lines that run overhead. The
conductor's exterior is constructed of pure aluminium, while the interior is
built of steel. This conductor can be galvanized or coated with another
substance to extend its life, to keep it from corroding. Steel has a higher
strength than aluminium, allowing mechanical force to be applied over the
conductor.
There are 4 main types
of ACSR conductors and they are as follows:
1. AAC Conductors: All Aluminium Conductors, or AAC, are made up of
numerous layers of concentrically stranded aluminum wires. These conductors
are used in overhead lines with low, medium, and high voltage. AAC is frequently
used in cities, where spans are often short yet great conductivity is required.
AAC is a common conductor in coastal regions due to its exceptional corrosion
resistance. AAC's employment in transmission lines and rural distribution is
limited due to the long spans employed and its relatively low strength to
weight ratio.
2. ACAR Conductors: ACAR is a
transmission conductor that combines several aluminum alloy strands to provide
outstanding electrical and mechanical balance qualities. Aluminum alloy wires
are used to cover the aluminum strands. The number of strands is included in
the core of the conductor. The fundamental advantage of this conductor is that
all of the strands are identical, providing for the best electrical and
mechanical qualities in the conductor design. When compared to an identical
ACSR, AAC, or AAAC, ACAR offers improved mechanical and electrical qualities.
ACAR is the optimum choice when ampacity, strength, and lightweight are the
most important considerations of inline design due to a good balance between
mechanical and electrical qualities.
3. AAAC Conductors: AAAC stands for All Aluminium Alloy Conductors. It
is made up of many layers of aluminum alloys stranded in concentric layers,
most commonly aluminum-magnesium-silicon. A high-strength aluminium alloy was
employed to achieve a high strength-to-weight ratio, which allows for improved
sag characteristics. All aluminium alloy conductors are commonly used for
primary and secondary transmission in bare overhead distribution and
transmission lines (11 kV to 800 kV lines) and HV substations. It can also be
employed in extremely polluted industrial districts and coastal locations due
to its corrosion resistance.
4. AACSR Conductors: AACSR is a
concentrically stranded conductor made up of one or more layers of
Aluminium-Magnesium-Silicon Alloy wire that are stranded around a high-strength
coated steel core. A single wire or stranded multi-wire core can be used. AACSR
is available with a Class A, B, or C galvanized steel core or an aluminium
coated steel core (AW). Grease can be applied to the core or the entire cable
might be infused with grease to provide additional corrosion resistance. Used
as a primary and secondary distribution cable as well as a bare overhead transmission
wire. For line design, AACSR provides the best strength. The use of variable
steel core stranding allows for required strength without losing ampacity.
The advantages of ACSR
conductors are as follows:
●
The conductor has high tensile strength.
●
Steel wires provide more reliability, ensuring
the conductor's safety margins.
●
The strongest mechanical resistance, improved
transport capacity, and high tensile strength are all advantages of this
material.
●
The ACSR conductor is suitable for medium and
long spans and requires minimal support.
●
Because of the large diameter of ACSR, the
corona limit is high.
●
The cost of high-voltage overhead cables is
significant.
●
By coating the steel wire with zinc, galvanic
corrosion is prevented and steel wire is protected.
●
Because of their exceptional strength, they are
used for overhead ground wires, river crossings, and long-span installation.
●
Lightweight and cost-effective design.
These are four types of
ACSR conductors and their advantages. If you are looking for a place to
purchase top-quality aluminum conductors, check out Cabcon India. It is one of
the top cable manufacturers in India.
Cabcon has built cutting-edge infrastructure, including in-house facilities and
high-speed, enhanced plants and machines, to help run and manage the complete
team as well as manufacture and sell things in a timely and efficient manner.
Visit www.cabconindia.com for more
information about their products and services.
Comments
Post a Comment